Product Introduction:

60W 10GBASE-T DIN Rail PoE++ Injector

SGD-PSE60TG

Product Description

The SGD-PSE60TG has a P+D/OUT port and a Data/IN port at one end, and an AC port at the other end. The P+D/OUT port can be connected to the PD device and output PoE++ signals to supply power to the PD device and transmit data for it. The Data/IN port can be connected to higher-level network management devices such as routers, switches, or servers. Through the Data/IN port, the PD device can be connected to the LAN or Ethernet. Connect the AC Port and AC socket with an AC cable, and the SGD-PSE60TG will work normally after the power is turned on.

The SGD-PSE60TG is a product with rails. It has rail structures on both sides, and it can be installed and fixed in the cabinet by the rails. The SGD-PSE60TG has screw holes on the bottom, and it can also be fixed to the wall through the screw holes. At the same time, the SGD-PSE60TG is also a desktop product, and it can be placed on the desktop. The SGD-PSE60TG has two LEDs on one end, red and green. The red LED is the power indicator, indicating the power connection status, and the green LED is the PoE++ indicator, indicating the working status of the PoE++. The SGD-PSE60TG has heat dissipation grilles on both sides, through which the heat of the motherboard can be dissipated, reducing the temperature of the product and increasing its lifespan.

The SGD-PSE60TG complies with the IEEE802.3af/at/bt PoE++ international standard protocol and has a handshake recognition function. Only when the SGD-PSE60TG is connected to the PD device and the handshake recognition is successful, it will provide power to the connected PD device. Otherwise, the SGD-PSE60TG will not provide power to any device. The SGD-PSE60TG's transmission rate is gigabit, its PoE++ output power is 60 watts, and its power supply pin is RJ1245+ RJ3678-, using an eight-wire full power supply mode. The maximum transmission distance is 100 meters.

The motherboard of the SGD-PSE60TG is an isolated design with a high-power isolation transformer. The motherboard has a built-in lightning protection circuit, short circuit protection circuit, and overvoltage protection circuit. The lightning protection level can reach 6KV. The input voltage of the motherboard adopts a wide voltage design, which is compatible with AC100-240V 50/60HZ. The EMC parameters can meet the requirements of IEC 61000-4-2/3/4/5/6 standards. The products have obtained CE, FC, Rohs, and other certifications and sell well in more than 100 countries and regions around the world.

Product Features

• IEEE802.3af/at/bt PoE++ international standard protocol and handshake recognition function

• Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3ae, IEEE802.3x protocols

• Wide input voltage AC100-240V 50/60HZ

• Output: 48V1.25A 60W, other voltages can be customized

• 100M/1G/2.5G/5G/10G adaptive transmission speed

• RJ1245+ RJ3678- power supply pin

• Rail installation, wall mounting, desktop installation, and other installation methods

• Heat dissipation grilles on both sides for easy heat dissipation

• Small size, less space, easy to install

• 6KV surge protection

• With overheat protection, overvoltage protection, overload protection, short circuit protection

• Conversion efficiency is over 85%

• EMC complies with IEC 61000-4-2/3/4/5/6 standards

• Environmental and high-temperature resistant ABS plastic material

Specifications

Product Applications

The SGD-PSE60TG is a single-port PoE+ Injector with strong compatibility, widely used in CCTV, Smart Home, Smart Medical Care, Audio Broadcasting, and other fields. It has changed the wiring mode of traditional weak current engineering, simplifies wiring construction steps, saves material and labor costs, and improves the stability and safety of the system.